Substations KTP, MTP, UKZ, KTZ, KKU, CSR, etc.

Complete transformer substations (KTP)

KTP are designed for receiving, converting and distributing electrical energy of three-phase alternating current in networks with an isolated or grounded neutral through an arc-extinguishing reactor.

Models: KTPB(K) 35/10(6); KTPB(K)110/35/10(6)kV; KTPG 100-1000/10(6) U1; KTPN 25-1000/10(6); PKTP 250-630/10(6) U1; KTP 25-250/10(6) U1; KTPG 100-1000/10(6)-0.4 HL1; KTPND 400-630/10(6) U1; BKTP 100-2500/10(6)-0.4 UHL1; KTPP; 2KTPP 250-2500/10(6); KTPPN 100-250/10(6) U1; 25/10(6)KTPSK 25/10(6); KTPND 25-250/10(6) U1; KTPN 4-10/10(6); KTPKO 10/27,5/0,23; KTPTO 80/0,38 U1; KTPJ 2-4/27.5 U1; KTPJ 25-400/27,5/0,4 U1; T1; KTP-P 1,2-2,5/10(6)/0.23; KTP-P 2/27.5; KTPS 100-1000/35 U1

• Complete transformer substations. Technical specifications.

Mast transformer substations (MTP)

Transformer mast substations are single transformer substations of outdoor installation and are used for receiving electrical energy with a voltage of 6 or 10 kV, converting into electricity with a voltage of 0.4 kV and power supply to individual settlements, small industrial facilities and other consumers in areas with a temperate climate from - 45 ° C to + 40 ° C.

Models: MTP 25-100/10(6) U1; MTPO 4-10/10(6)/0.23 U1; MTPJ 1,25-2,5/10(6)/0,23 U1; MTPJ 10/27,5

• Mast transformer substations. Technical specifications.

Cathodic protection devices

Cathodic protection distribution devices are designed to protect gas and oil pipelines and other underground metal structures from soil corrosion and have the ability to automatically or manually adjust the protective potential.
Cathodic protection stations are designed for cathodic electrochemical protection of underground metal structures (gas pipelines, oil pipelines, utility facilities, etc.) from electrochemical corrosion by converting single-phase alternating current into smoothly regulated rectified current.

Models: UKZV; UKZN; PTM(D); TDE(D)-9

• Cathodic protection devices. Technical specifications.

Complete distribution devices

The complete distribution devices of the K-07 KTZ and KRUN-07 KTZ series with a voltage of 10 (6) kV, for currents (630-1600) A, industrial frequency of 50 Hz, are designed for receiving and distributing electric energy at power supply facilities of enterprises of all sectors of the national economy and agricultural consumers.

Models: K-07 KTZ; KRUN-07 KTZ voltage 630-1600/10(6)kV

• Complete distribution devices. Technical specifications.

Complex condenser installations

Complete high-voltage capacitor installations are designed to increase the power factor of electrical installations of industrial enterprises and increase the csf in distribution networks with a voltage of 6 or 10 kV.

Models: CCU 6,3-10,5

• Complex condenser installations. Technical specifications.

CSR series prefabricated cameras

The CSR series modular one-way maintenance chambers are designed for installation inside switchgears and operation in three-phase alternating current installations with a frequency of 50 and 60 Hz, a voltage of 6 and 10 kV in systems with an isolated or grounded neutral through an arc-extinguishing reactor.

Models: CSR-292; CSR-2-10; CSR-366

• The cameras are prefabricated CSR series. Technical specifications.

Distribution points and panels

Distribution points are designed for receiving and distributing electrical energy with a voltage of 380 / 220V AC three-phase current with a frequency of 50 Hz in networks with a blindly grounded neutral to protect outgoing lines in case of overloads, short circuits and unacceptable voltage surges, as well as for infrequent operational switching on and off (up to 6 times a day).
Distribution panels of one-way maintenance of the SCHO-70 series are used for receiving, distributing and protecting lines from overloads and short-circuit currents of outgoing lines. They are designed for completing switchgears (RC) of three-phase alternating current 380/220 V, frequency 50 Hz, networks with a dead-grounded neutral and installation inside electrical premises.

Models: PR11; SR11; SCHO-70 series

• Distribution points. Technical specifications.

High-voltage cells

High-voltage cells are designed for receiving and distributing electrical energy of three-phase alternating current with a voltage of 6 and 10 kV of industrial frequency 50 Hz. The cells are used for connection, partitioning, power supply and protection of powerful quarry consumers in distribution networks.

Models: KS-02-10(6) U1; YAKNO series

• The cells are high-voltage. Technical specifications.

Drawers, blocks and control cabinets

The boxes are designed for local, remote and automatic control of asynchronous electric motors up to 75 kW with long-term operation, as well as for signaling and protection of asynchronous motors with a short-circuited rotor.
The control units are designed to control electric motors of rocking machines with a power of 5.5 to 40 kW, protect them from overloads, short-circuit currents, disconnections during emergency modes and re-start in automatic mode after restoring power to the line.
Control cabinets are designed to control the engines of screw oil pumping pumps, provide automated start-up of pump motors in real time and their protection in case of overload and emergency situations in the supply electrical networks.

Models: YATP-0.25; 5000-5435; RUSM 5000; YAUO 9601; YAUO 9602; RUSM 5100, RUSM 5400; BUESKN; BDRM; BUSHK-2M; START-3M; SHUENG; BNG; SHUVN; SHU with "OPTIMAD"; SHUN

• Drawers, blocks and control cabinets. Technical specifications.

Control and measuring equipment

Designed to protect cables running from an underground structure to a terminal panel designed to connect cables from underground utilities and measuring instruments.

Models: KICK, SKIP

• Control and measuring equipment. Technical specifications.

Catalog

Online Selection